Zigbee Switches/Dimmers

(28 customer reviews)


✔️ Compatible with Philips Hue Bridge (SM308, SM309 only), Amazon Echo Plus, Echo Show 2nd Gen, Echo Studio, Tuya Zigbee Gateway, Samsung SmartThings, deCONZ, Raspbee and others
✔️ Can be linked to and controlled by max. 30 zigbee remotes that support zigbee light link through touchlink
✔️ Supports the new zigbee green power feature, and can bind to and be controlled by up to 20 zigbee green power remotes
✔️ Smart switch for LED and traditional incandescent lights
✔️ Smooth dimming control for dimmable lights

SKU: N/A Categories: , Tag:




1. Wire up the switch as per enclosed diagram and place the device as close as possible to your Zigbee hub during the initial setup
2. Either press the reset button or power cycle the device 5 times to initiate the Touchlink connection. SM308/SM309 should trigger the lights flashing, MS104Z will make a beeping noise to confirm a successful reset
3. Amazon Echo Plus/Echo Show 2nd Gen – Ask Alexa to discover new devices. Philips Hue – Add a new light through the Settings->Light Setup (SM308, SM309 only)
4. Any other compatible Zigbee hub – follow your own hub’s instructions for adding new devices

Additional information

Weight 45 g
Dimensions 4.5 × 4 × 2 cm

SM308, SM309, MS104Z



Wiring Diagram


How to Reset and Connect SM308 to the Hue bridge

28 reviews for Zigbee Switches/Dimmers

5 star
4 star
3 star
2 star
1 star
Powered by Customer Reviews Plugin
Showing 2 of 28 reviews (4 star). See all 28 reviews
  1. Phil Smith (verified owner)

    Verified reviewVerified review - view originalExternal link

    The not so good:
    A bit fiddly to set up, took a few goes on both my units. Multiple small power outages meant I had to reconnect once. Instructions are a bit confusing.
    The good:
    Solves a problem and works reliably. I would recommend

  2. Neo

    Great product, works well but still have some major flaws.Note that It only works properly with push button switch (not standard light switches). standard switches would still operate if you flip the button fast (on-off-on). Not ideal , seems like a workaround and it was not clearly stated. Unfortunately only found out after ordered multiple for house upgrade and stuck with them. There are other products that work with normal switches… it should be able to do this too!4 starts instead of lower due to stellar customer service of samotech

Only logged in customers who have purchased this product may leave a review.

en English