£29.99 – £32.99 excl. VAT
Next-Gen Protocol: Boasting the advanced ZigBee 3.0 protocol, this dimmer offers seamless compatibility and elevated performance.
Universal Compatibility: Effortlessly sync with renowned systems such as Philips Hue, Homekit, Echo Plus, Hubitat, Homeassistant (ZHA, deConz, Conbee, Raspbee), and a plethora of universal ZigBee gateways.
Voltage Flexibility: With a broad input and output voltage range of 100-240VAC, it caters to diverse power needs.
Versatile Load Support: Efficiently handle resistive, capacitive, or inductive loads. A retractive switch is essential for optimal performance.
High Capacity: Offering a single channel output, it supports up to a whopping 400W.
Reliable Terminals: Ensure safety and a sturdy connection with the screw terminals for both input and output.
Factory-Defined Settings: Benefit from the trailing-edge version, preset at the factory, ensuring peak performance.
Granular Control: Dictate the ON/OFF state and modulate the luminosity of the connected lighting.
Simplified Pairing: As a ZigBee router device, it supports Touchlink commissioning, enabling direct pairing with compatible Zigbee remotes sans a coordinator.
Self-Reliant Networking: Form a Zigbee network autonomously without a coordinator, and seamlessly integrate other devices.
Optimized Binding: It not only supports the find-and-bind mode for ZigBee remotes but also champions Zigbee’s green power, accommodating up to 20 green power remotes.
Compact & Functional: Its mini dimensions allow for snug fitting within a standard 86*86mm wall box.
Energy Monitoring: Stay informed with active power and energy metering capabilities.
Wiring Versatility: Flexibility to wire with or without a neutral wire. Can be used in 2-way wiring with retractive/momentary/push or standard on/off toggle switches.
Smart Illumination: Set minimum dimming levels, startup brightness, and leverage the cutting-edge light source detection algorithm.
Frequency & Safety: Operates on a 2.4GHz radio frequency and designed with a waterproof grade of IP20, ensuring safety and stability.
@samotech_official #explore #dimming #philipshue #smarthome #hue #samotech #zigbee #smartlighting #smartlights #automation ##homeassistant #homekit #FYP #diyproject #techtips #unbox ♬ 15 seconds 90’s style hip hop(1491960) – Three streaks friends
Supported Zigbee clusters:
Input Zigbee clusters:
• 0x0000: Basic
• 0x0003: Identify
• 0x0004: Groups
• 0x0005: Scenes
• 0x0006: On/off
• 0x0b04: Electrical Measurement
• 0x0b05: Diagnostics
• 0x0b08: Level Control
• 0x0702: Simple MeteringÂ
| Weight | 35 g |
|---|---|
| Dimensions | 42 × 38 × 16 mm |
| Type | Typical, Preconfigured |
| BULB / LOAD TYPE | COMPATIBILITY | RISK LEVEL | TYPICAL SYMPTOMS | RECOMMENDATION | |
|---|---|---|---|---|---|
| SAMOTECH Dimmable GU10 |  |
Compatible | None | None | Recommended |
| Incandescent / Halogen |  |
Compatible | None | None | Recommended |
| Dimmable LED (Quality brands) |  |
Compatible | None | None | Recommended |
| Dimmable LED (Cheap / unknown) | |
Conditional | Very Low | Minor flicker. May not turn off fully. | Test first. Use a bypass if required. |
| Low load LEDs (<15W) |  |
Conditional | Very Low | Minor flicker. May not turn off fully. | Use a bypass |
| LED strips (220V dimmable driver) |  |
Conditional | Medium | Minor flicker | Test first |
| Integrated LED fittings (separate LED driver, colour modes) |  |
Conditional | Medium | Flashing or intermittent operation due to internal LED driver control | Test first |
| Non-dimmable LED | |
Not compatible | High | Flicker, overheating | Do not use with dimmers |
| Smart bulbs |  |
Not compatible | High | Disconnects, rebooting | Do not use with dimmers |
| LED strips (220V non-dimmable driver) | |
Not compatible | High | Flicker, overheating | Do not use with dimmers |
| Fluorescent / CFL |  |
Not compatible | High | Failure to start | Do not use with dimmers |
| 5 star | 89% | |
| 4 star | 10% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Best smart dimmer!
Great module. Used with a 2-way on/off toggle light switch, no neutral setup. Linked to remote panel to control dimming using ZigBee 3.0. Works perfectly also with a 1gang/1way switch.
The perfect ZigBee dimmer module
What’s not to like, smaller version of an already great module. Win win!
Very easy to set up, would be nice if it could instantly power on lights to full brightness instead of dimming up, but otherwise no issues.
Very happy with this.
Works straight off, instructions are thorough and once you workout the setup needed it’s a breeze to wire.
I have quite a few of these now and they are brilliant. Would highly recommend for any smart home.