The SM308 Zigbee switch is an innovative AC in wall ON/OFF switch with a ZigBee 3.0 control interface. The SM308 switch is designed for 100-240VAC wide input/output, 1ch and maximum 400W output. The SM308 switch supports resistive loads and capacitive loads.
The SM308 switch is compatible with Samotech SM310 Zigbee Gateway, Philips Hue Bridge, Amazon Echo Plus, Echo Show 2nd Gen and Echo Studio. It can be controlled by a ZigBee gateway interface, physical light switches or remote controllers that can be added to the Zigbee network and binded with the SM308 switch.
We strongly recommend that you engage a qualified electrician to perform any electrical works.
1. Wire up the switch as per the enclosed diagram and place the device as close as possible to your Zigbee hub during the initial setup
2. Press the reset button 5 times to reset the switch and initiate the Touchlink connection. If you do not intend to reset the switch, press the button 4 times to initiate the Touchlink connection only.
3. Amazon Echo Plus/Echo Show 2nd Gen – Ask Alexa to discover new devices. Philips Hue – Add a new light through the Settings->Light Setup
4. Any other compatible Zigbee hub – follow your own hub’s instructions for adding new devices
When the dimmer is failing to connect to your compatible Zigbee hub. Ensure the dimmer has not been previously added to Zigbee Hub/Alexa/Hue app before repeating the initial procedure again. If the dimmer is already present in the devices list, please remove first.